Wireless Basic Gen 2 Voltage Meter - 10VDC

  • Part #:RFB-0235-2
  • Weight:0.7oz
  • Availability: In Stock

Price: $84.00
Price: $113.40


This Basic Gen2 Voltage Meter measures the voltage between two electrical points. It can be connected to the power and ground of any voltage source and measure within stated accuracy up to 10 VDC. It can be connected to any kind of variable voltage device, such as a transducer or sensor that outputs voltage. If the device to be measured is passive, the user must supply their own excitation voltage to the device.

Features & Specifications:

  • Wireless range of 1,200+ feet through 12+ walls *
  • 900MHz Operating Frequency
  • Supply Voltage: 2.0-3.8 VDC**
  • Frequency-Hopping Spread Spectrum (FHSS)
  • Improved interference immunity
  • Integrated memory: Up to 512 sensor messages
  • Power: Replaceable 3.0V (CR2032) Coin Cell Battery
  • At 1 hour heartbeat setting, coin cell battery will last ~ 1-2 Years***
  • Operating temperature range (board circuitry and coin cell): -7°C to +60°C (20°F to +140°F) ****
  • Optimal battery temperature range (coin cell): +10°C to +50°C (+50°F to +122°F) 
  • Encrypt-RF® (256-bit key exchange and AES-128 CTR)
  • Onboard data memory stores up to 512 readings per sensor:
    • 10-minute heartbeats = 3.5 days
    • 2-hour heartbeats = 42 days
  • Over-the-air updates (future proof)
  • The software also has multilevel passwords and the highest level encryption to meet 21CFR part 11 compliance
  • Free iMonnit basic online wireless sensor monitoring and notification system to configure sensors, view data and set alerts via SMS text and email 
  • Mounting Tape & Mounting screws included
  • Dimensions: 1.125" x 2.0" x 0.875"

Additional Information

*Actual range may vary depending on environment

**Hardware cannot withstand negative voltage. Please take care when connecting a power device

***Battery life is determined by sensor reporting frequency and other variables. Other power options are also available

****At temperatures above 100°C, it is possible for the board circuitry to lose programmed memory

Technical Information

Required Accessories

Part #: RFR-0526-2
$210.00 (USD)
$283.50 (CAD)
The Gen 2 Ethernet Gateway allows your RF Wireless Sensors to communicate with the Scigiene Premier (more...)

Scigiene 21 CFR Part 11 Premiere is a secure cloud based monitoring and notification software dedica (more...)

Part #: RFR-0400
$40.95 (USD)
$55.28 (CAD)
Scigiene Premiere is a secure cloud based monitoring and notification software dedicated to the Scig (more...)