This Basic Gen2 900MHz Duct Temperature Sensor uses a NTC type thermistor probe with an 8' UL listed plenum cable to accurately measure temperatures in duct work, while maintaining a sealed environment. Can be easily installed and mounted for long term use.
Features:
Specifications:
Temperature
Measurement
|
Range |
|
Accuracy
@ 0°C (32°F) |
± 1°C (±1.8°F) | |
Calibrated
accuracy @ 0°C (32°F) |
± 0.25°C (±
0.45°F) | |
Resolution |
0.1°C (0.18°F) | |
Leaded Probe
|
Transducer type |
NTC Thermistor |
Tip dimension |
6.35 mm
(0.25") diameter by 101.6 mm (4") | |
Tip material |
Type 304
stainless steel | |
Cable material |
Plenum | |
Cable diameter |
3.18 mm
(.125") | |
Cable length
options |
Standard
length: 2.4 m (8 ft) | |
Gen 2 Wireless
|
Data logging |
Sensor logs
2000 to 4000 readings if gateway connection is lost |
Wireless
protocol |
Gen 2 Proprietary Frequency | |
Wireless
transmission power (EIRP) |
50 mW (900MHz),
25 mW (868 MHz), 10 mW (433 MHz) | |
Wireless range |
2,000+ ft.
through 18+ walls with the ALTA XL® Gateway | |
Security |
Encrypt | |
General
|
Battery voltage
range |
2.0 to 3.8 VDC |
Operating
altitude (non |
| |
Storage
altitude (non |
| |
Operating
humidity |
5 to 85% RH
(non | |
Certifications | 900 MHz sensors: FCC ID: ZTL-G2SC1 and IC: 9794A-G2SC1. | |
1. Response time defined as five time constants for 99.3% of actual
temperature. 2. Operating and storage altitude without DC power supply is -30.48 to
9144 m (-100 to 30000 ft). |
* Actual range may vary depending on environment
** Battery life is determined by sensor reporting frequency and other variables
*** Hardware cannot withstand negative voltage. Please take care when connecting a power device.