The Basic Gen 2 900MHz Water Rope Sensor detects conductive liquids anywhere along the length of the detection rope by using two wires covered with conducting polymer. When water or conductive liquid contacts the rope, the sensor will immediately turn on the RF radio and transmit the data to the wireless gateway and Scigiene Online Sensor Monitoring and Notification System, allowing the user to immediately receive an alert by SMS text, email or voice call. The sensor rope dries quickly allowing the sensor to reset for next use. The sensor comes with an initial 10 foot section of water detection rope and can be expanded up to 100 feet by simply clicking additional 10 foot sections of detection rope together.
Features:
Specifications:
Power | Replaceable 3.0V (CR2032) Coin Cell Battery |
Supply Voltage | 2.0-3.8 VDC *** |
Operating temperature range (board circuitry and coin cell) | -7° to +60°C (+20° to 140°F) |
Optimal battery temperature range (coin cell) | +10°C to +50°C (+50°F to +122°F) |
Material | PE & Alloy lead |
Weight | 30g/meter |
Cable Length | 10 ft (120 in) included (expandable to 100 ft) |
Pull Force Limit | 60 kg |
Fire Resistance | Second pressure plenum cable |
Cable Diameter | 5.5 mm |
Core Resistance | 3ohm/100 meters |
Maximum Exposed Temperature | +75°C (+167°F) |
Cable length | 10’ included, expandable to up to 100’ - See below for ordering instructions |
Dimensions | 1.125" x 2.0" x 0.875" |
* Actual range may vary depending on environment
** Battery life is determined by sensor reporting frequency and other variables
***Hardware cannot withstand negative voltage. Please take care when connecting a power device