Scigiene Corporation

Description

Scigiene’s Wireless Gen 2 Accelerometers can be used in a host of applications where knowing impact, vibration, inclination, etc. is required. Scigiene's wireless sensors are ideal for pharmaceutical, medical and other high tech applications where loss of data is unacceptable. These also have an amazing range of over 1000 ft. with 10 year battery life and can be remotely upgraded via network connections. These are truly the most advanced wireless sensors available. Accelerometer activates at a set time interval (defined by user) and measures g-force along X, Y and Z axes. Primary use is as an inclinometer or tilt sensor. There are three operating modes, +/-2 G, +/-4 G, or +/-8 G. The data is displayed as g-force on each axis.

Example: X: 0.001 Y: 0.031 Z: 1.01

Features:

Wireless range of 1,200+ feet through 12+ walls
Frequency-Hopping Spread Spectrum (FHSS)
Improved interference immunity
Improved power management for longer battery life
Encrypt-RF ® Security (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages)
All ALTA sensors now have up to 3200 readings: - 10-minute heartbeats = 22 days, - 2-hour heartbeats = 266 days
Over-the-air updates (future proof)

Specifications:

Supply voltage	2.0-3.8 VDC (3.0-3.8 VDC using power supply)
Current consumption	0.2 µA (sleep mode), 0.7 µA (RTC sleep), 570 µA (MCU idle), 2.5 mA (MCU active), 5.5 mA (radio RX mode), 22.6 mA (radio TX mode)
Operating temperature range (board circuitry and batteries)	-18°C to 55°C (0°F to 130°F) using alkaline -40°C to 85°C (-40°F to 185°F) using lithium
Optimal battery temperature range (AA)	+10°C to +50°C (+50°F to +122°F)
Sensitivity	4096 count/g
Sensitivity Range	+/- 2 G
Measurement accuracy	±2.5 % (force: X, Y, Z)
Minimum g-force to turn on/wake up	0.050-0.100 g
Fastest update interval/heart rate in any configuration	Heartbeat: 1 minute
Bandwidth for data measurement	800 Hz
Certifications	900 MHz product; FCC ID: ZTL-G2SC1 and IC: 9794A-G2SC1

Please call your Scigiene representative for help in designing your wireless system in order to make sure all range and other technical specifications are fully met.