The GEN 2 Wireless Pressure Meters measure pressure in gas, liquid, or vapor supply lines. The meters combine a standard pressure transducer interfaced to a Scigiene GEN 2 wireless radio. You can measure the pressure within the line and review the data in the Scigiene Premiere Online Sensor Monitoring and Notification System. The data is stored in the online system and can be reviewed on dashboards and charts and exported as a data sheet or graph. You can customize settings to your use case and set notifications and alerts in the cloud-based software to know immediately via text, email, or call if the pressure is above or below an optimal range.
The meters:
Features:
Specifications:
| Supply voltage | 2.0-3.8 VDC |
| Current consumption | 0.2 µA (sleep mode), 0.7 µA (RTC sleep), 570 µA (MCU idle),
2.5 mA (MCU active), 5.5 mA (radio RX mode), 22.6 mA (radio
TX mode) |
| Operating temperature range (board circuitry and battery) | -40°C to +85°C (-40°F to +185°F) |
| Included battery - Max temperature range | -40° to +85°C (-40° to +185°F) |
| Included battery - Capacity | 1500 mAh Lithium Thionyl Chloride |
| Wireless transmission power | 50 mW (900MHz) |
| Wireless antenna type | 1/2-wave waterproof dipole with RP-SMA connector and swivel
neck; dBi of 3.0 (900/868MHz); length of 8.27"
(210mm) (900/868MHz) |
| Resolution | 0.1 PSI |
| Enclosure rating | NEMA 1, 2, 4, 4x, 12, and 13 rated, sealed, and weatherproof |
| UL rating | UL Listed to UL508-4x specifications (File E194432) |
