|
This sensor is suitable for the measurement of liquid or gas pressure including difficult media such as contaminated water and mildly corrosive liquids or gasses. The sensors are for use with our IT0220 and IT0229 dataloggers. There are three pressure ranges available, 15 to 100psi, 15 to 250psi and 15 to 500psi. These are gage sensors so the back of the sensor is ported to the atmosphere. They should not be used if the back of the sensor will be under pressure or will experience high humidity. The sensor plugs into an amplifier cable that connects to the loggers (IT0220 or IT0229). The cable on the sensor is 500mm long. The cable from the amplifier to the logger is 1000mm so the combined length of cable is 1500mm.
|
