Scigiene's Industrial Wireless Gen 2 dry contact sensors can be used to detect contact between two wired contact points. This sensor can be used with an external mechanical switch or a contact plate to alert the user via SMS text and/or email when the contacts touch or a switch is triggered.
Features:
Specifications:
|
Supply voltage |
2.0–3.8 VDC |
|
|
Current
consumption |
0.2 µA (sleep
mode), 0.7 µA (RTC sleep), 570 µA (MCU idle), 2.5 mA (MCU active), 5.5 mA
(radio RX mode), 22.6 mA (radio TX mode) |
|
|
Operating
temperature range (board circuitry and battery) |
-40°C to +85°C
(-40°F to +185°F) |
|
|
Included battery |
Max temperature
range |
-40° to +85°C
(-40° to +185°F) |
|
Capacity |
1800 mAh |
|
|
Optional solar
feature |
Solar panel |
5VDC/30mA (53mm x
30mm) |
|
Charging
temperature range |
0° to 45°C (32°
to 113°F) |
|
|
Max temperature
range |
-20° to 60°C (-4°
to 140°F) |
|
|
Included
rechargeable battery |
600 mAh/>2000
charge cycles (80% of initial capacity) |
|
|
Solar efficiency |
Optimized for
high and low-light operation |
|
|
Charging
efficiency |
40% |
|
|
Luminous
sustainability |
Minimum of 250
LUX |
|
|
Lead wire length |
30.4cm (12
inches) |
|
|
Detection wires |
High impedance |
|
|
Enclosure rating |
NEMA 1, 2, 4, 4x,
12 and 13 rated, sealed and weatherproof |
|
|
UL rating |
UL Listed to
UL508-4x specifications (File E194432) |
|
|
Certifications |
900 MHz product;
FCC ID: ZTL-G2SC1 and IC: 9794A-G2SC1 |
|
