Scigiene Corporation

Description

Scigiene’s Wireless Gen 2 Dry Contact Sensor can be used to detect contact between two wired contact points. This sensor can be used with an external mechanical switch or a contact plate to alert the user via SMS text and/or email when the contacts touch or a switch is triggered. Scigiene's wireless sensors are ideal for pharmaceutical, medical and other high tech applications where loss of data is unacceptable. These also have an amazing range of over 1200 ft. with 10 year battery life and can be remotely upgraded via network connections. These are truly the most advanced wireless sensors available.

Features:

Wireless range of 1,200+ feet through 12+ walls
Frequency-Hopping Spread Spectrum (FHSS)
Best-in-class interference immunity
Best-in-class power management for longer battery life
Encrypt-RF® Security (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages)
Data logs 2000 to 4000 readings if the gateway connection is lost (non-volatile flash, persists through the power cycle): 10-minute heartbeats = ~ 22 days, 2-hour heartbeats = ~ 266 days
Over-the-air updates (future-proof)

Specifications:

Detection Requirements	Input impedance	2.5 MΩ
Detection Requirements	Maximum medium impedance	900.0 kΩ¹
Lead	Cable length	Standard: 0.3 m (1 ft) Optional: 0.9 m (3 ft)
	Wire count	2-conductor (red/black)
	Wire gauge	22 AWG
	Conductor material	Stranded Copper 7/30
	Insultation	PVC, 0.010"
	Shield	No
	Jacket	PVC (black)
	Overall diameter	4.2 mm (0.164")
	Ratings / Approvals	NEC (UL) Type CM, UL AWM Style 2464, CSA AWM FT4, RoHS
	Temperature Rating	20°C to 60°C (-4°F to 140°F)
	Voltage Rating	300 V Max²
	Dielectric Strength	1500 V RMS²
Gen 2 Wireless	Data logging	Sensor logs 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through power cycling): 10-minute Heartbeats = ~22 days - 2-hour Heartbeats = ~266 days
	Wireless protocol	Gen 2 Proprietary Frequency-Hopping Spread Spectrum (FHSS)
	Wireless transmission power (EIRP)	50 mW (900MHz), 25 mW (868 MHz), 10 mW (433 MHz)
	Wireless range	2,000+ ft. through 18+ walls with the Gen 2 XL® Gateway
	Security	Encrypt-RF ® (256-bit key exchange and AES-128 CTR)
General	Battery voltage range	2.0 to 3.8 VDC
	Operating altitude (non-pressurized environments)	-15.2 to 1,982 m (-50 to 6,500 ft)³
	Storage altitude (non-pressurized environments)	-15.2 to 3,048 m (-50 to 10,000 ft)³
	Operating humidity	5 to 85% RH (non-condensing)
	Certifications	900 MHz sensors: FCC ID: ZTL-G2SC1 and IC: 9794A-G2SC1.
1. The resistance between the conductive probe ends must be less than this to ensure detection. 2. The input of this sensor is passive. Never apply any voltage to the detection lead. 3. Operating and storage altitude without DC power supply is -30.48 to 9144 m (-100 to 30000 ft).