Wireless Basic Gen 2 Voltage Meter Sensor 5 VDC


  • Part #:RFB-0233-2
  • Weight:0.7 oz
  • Availability: Inquire

Price: $136.50
Price: $184.28


Description

This Basic Gen 2 900MHz wireless voltage sensor is capable of measuring the voltage between two electrical points. The sensors are capable of measuring voltage by connecting the leads on the sensor to the positive and ground terminals of the device being measured. The sensors can be connected to any kind of variable voltage device, such as a transducer or sensor that outputs voltage. If the device to be measured is passive, the user must supply their own excitation voltage to the device.

Features:

  • 900MHz Operating Frequency
  • Wireless range of 1,200+ feet through 12+ walls *
  • Can store up to 3200 readings
  • Frequency-Hopping Spread Spectrum (FHSS)
  • Improved interference immunity
  • Encrypt-RF® (256-bit key exchange and AES-128 CTR)
  • At 1 hour heartbeat setting, coin cell battery will last ~ 1-2 Years**
  • Over-the-air updates (future proof)
  • The software also has multilevel passwords and the highest level encryption to meet 21CFR part 11 compliance
  • Mounting Tape & Mounting screws included

Specifications:

Power

Replaceable 3.0V (CR2032) Coin Cell Battery

Operating temperature range (board circuitry and coin cell)

-7°C to +60°C (20°F to +140°F)

Optimal battery temperature range (coin cell)

+10°C to +50°C (+50°F to +122°F)

Supply Voltage

2.0 – 3.8 VDC ***

Voltage Range

0-5 volts DC****

Resolution

~1 mV

Accuracy

+/- (0.006 VDC + 3.0% of Reading)

Open Circuit Voltage

~0.00 volts
Max rated input
10 volts

Input Impedance

13 kOhms

Lead Wire Length

2 Wires, 1 ft (12 in), Red (+), Black (-), 18 AWG (Custom lengths available upon request)

Dimensions

1.125" x 2.0" x 0.875"

Additional Information

* Actual range may vary depending on environment

** Battery life is determined by sensor reporting frequency and other variables

***Hardware cannot withstand negative voltage.  Exercise caution when connecting a power device.

****The sensor is capable of measuring above 5 volts but may not meet the specified accuracy above this value.

Technical Information

Required Accessories

Scigiene 21 CFR Part 11 Premiere is a secure cloud based monitoring and notification software dedica (more...)

Part #: RFR-0539-2
$519.75 (USD)
$701.66 (CAD)
The Scigiene GEN 2 4G Industrial Cellular Gateway allows you to control GEN 2 Wireless Sensor settin (more...)

Part #: RFR-0538-2
$404.25 (USD)
$545.74 (CAD)
The Scigiene GEN 2 4G Cellular Gateway allows you to control GEN 2 Wireless Sensor settings without (more...)

Part #: RFR-0526-2
$231.00 (USD)
$311.85 (CAD)
The Gen 2 Ethernet Gateway allows your RF Wireless Sensors to communicate with the Scigiene Premier (more...)

Part #: RFR-0529-2
$288.75 (USD)
$389.81 (CAD)
The GEN2 Modbus Gateway acts as a data concentrator for Scigiene’s GEN 2 long range wireless sensor (more...)