Ideal for high performance applications, this instrument has all the features need for most industrial processes. Both input signal and control output are selected through the front keyboard without any internal hardware change. Power supply for remote loop powered transmitters is standard and is a must for high-end applications.
CLEARANCE - Limited quantities available, please inquire.
Features & Specifications:
- Accepts thermocouples type J, K, T, N, R, S; Pt100 RTD, linear 4-20 mA, 0-50 mV, 0-5 Vdc
- Double LED display: red for PV and green for SV
- Dual SPST 3 A / 250 Vac relays and dual SPDT 5 A / 250 Vac relays can be individually programmed for control or alarm
- Isolated 4-20 mA output with 1500-level resolution, maximum 550 ohm load for control or PV / SV retransmission. It can also be configured for digital input or output (10 Vdc / 20 mA)
- Sampling rate: 4 measurements per second
- One digital input for dry contact with 5 programmable functions
- Remote set point input for 4-20 mA DC signal (N2000)
- 24 Vdc / 30 mA supply output for remote transmitter excitation
- RS485 communication with Modbus RTU protocol (optional)
- Auto tuning PID control
- Auto/Manual mode, seamless transfer
- Programmable Soft start up to 9999 seconds
- Ramp and Soak: 7 programs of up to 7 segments each. Can be linked to create longer programs of up to 49 segments
- Measured value resolution: 12,000 levels
- Control output update: 250 ms
- Up to four configurable relays, two timer alarms
- Alarm functions: LO, HI, differential, differential LO, differential HI, sensor break and event
- Alarm initial blocking function
- Power: 100 to 240 Vac/dc, +/- 10%, 50/60 Hz; optional 24 Vdc/ac
- Maximum consumption: 4 VA
- Circuitry can be removed from the front panel
- Operating environment: 0 to 55ºC, 20 to 90 % RH
- Front panel: IP65, Polycarbonate UL94 V-2, Back panel: IP30, ABS + PC UL94 V-0
- Dimensions: 48 x 96 x 92 mm, Panel cut-out: 45.5 x 93 mm
- Weight: 240 g (265 g with options)
