Timestrip® neo is an electronic
indicator that uses seven LEDs to provide clear, non-reversible alerts when the temperature extends
above or below a specified monitoring range.
The Timestrip® neo is a platform for a series of small, micro-weight indicators
with huge versatility.
Benefits & Features
Applications
For temperature monitoring during storage and transportation in:
|
Specifications |
|
|
Operating range |
"-20°C to 60°C"" |
|
Sensor |
Internal NTC |
|
Type of use |
Single use, non-reversible |
|
Activation |
Hold button for 3.5 seconds |
|
Query status |
Press button |
|
Start delay |
30 minutes |
|
Temperature sample rate |
32 seconds |
|
Temperature breach duration |
|
|
|
Single event under 0ºC for 60 minutes |
|
Monitoring Stop |
Disabled |
| Low temperature alarm | 0ºC ±0.5ºC |
| LED indicators | Power on Under 0ºC for 30 Minutes Under 0ºC for 60 Minutes |
|
Housing |
Rigid plastic |
|
Battery |
CR2032 lithium
button cell |
|
Active Life |
1 year |
|
Shelf Life |
2 years |
|
Environmental |
IP54 |
LED Notifications
|
Status |
LED Indication |
|
Start |
Green ‘Power’ LED flashes 3 times |
|
Display update |
LEDs flash once
every 8 seconds |
|
Temperature below 0°C for > 30
minutes |
Red ‘30 min’ LED flashes once every 8 seconds |
|
Temperature below 0°C for > 60 minutes |
Red ‘60 min’ LED flashes once every 8 seconds |
How to Use:
1. To activate, press and hold the button for >3.5 seconds until the green ‘Power on’ LED flashes 3 times.
2. Once the indicator has been activated, the ‘Power on’ LED
will flash every 8 seconds.
3. The device
starts monitoring temperature after the 30-minute start delay.
4. If no
temperature breach has occurred, the green ‘Power on’ LED will flash.
5. When the temperature drops below 0°C for more than 30 minutes single event the red ’30minute’ LED will flash.
6. When the temperature drops below 0°C for more than 60 minutes single event , the red ’60 minute’ LED will flash.
