Low Level Peroxide Test Strip up to 400 ppm. This test strip can be used to test pools and hot tubs where peroxides, rather than chlorine, are used to sanitize and in concentrations 100 PPM or greater. Recommended peroxide levels vary, therefore, the test strip can be used to test the concentrations users prefer.

This strip can also test peroxide utilized to sterilize hydroponic greenhouse reservoirs. It is important to regularly clean greenhouse reservoirs and using water with peroxide is a popular means of achieving this. Proactive cleaning of greenhouse reservoirs reduces algae, the amount of microbes in the water, and ultimately can lead to higher yields from healthier plants.

Features:

• Packed in moisture wicking bottle to protect the strips from humidity
• Calibrated at 0, 100, 200, and 400 ppm, and gives results in just seconds
• Ideal for low range peroxide tests for solutions that are over 100 ppm
• 100 Strips/Vial
• Shelf Life: 18-24 Months

INSTRUCTIONS:

1. Remove one test strip from the vial. Do not touch the test pad with your fingers.
2. Dip the test strip into the solution being tested for 1 second.
3. Remove and shake off any excess liquid. Compare the test pad to the color chart after 30 seconds.

NOTE: If this test strip is used in very high concentrations of Peroxide (above 2000ppm or 0.2%), the test strip will not turn purple. Instead, it will turn an off-white with a hint of green.