|
These DIN rail mounting Temperature Transmitters are fully programmable for Pt100 and Thermocouple sensors. Available with either a 4-20mA 2 or 0-10 Vdc output either isolated or non-isolated. The flexibility of in-the-field configuration translates into a one-model-fits-all signal conditioning and isolator module.
|
| |
| Features & Specifications: |
- Programmable input: Pt100 RTD and thermocouples type J, K, T, E, N, R, S, B
- 2 wire loop powered 4-20mA output or 3 wire loop powered 0-10 Vdc output
- Power supply: 10 to 35 Vdc
- Isolated or non-isolated models
- Linearized output and cold junction compensation for thermocouples.
- 2 or 3-wire Pt100 with linearization
- Isolated model: 1000 Vac isolation
- Programmable range and offset correction
- Configured via TXConfig software and TXConfig USB interface connected to the PC
- Accuracy: 0.2% full scale for Pt100 and 0.3% max. full scale for Thermocouples
- Temperature effect: 0.003% span per °C
- Working Temperature: -40°C to +85°C
- Programmable burnout upscale or downscale sensor failure protection
- Manual zero (offset) adjustment can be done with 2 front Keys
- Digital Filter can be set for best 50 or 60 Hz performance
- NOTE: TXConfig USB is required to program or reprogram the TxRail and TxIsoRail products
|
|
|
CLEARANCE - $103.00 $51.50 USD
