The GEN 2 Wireless Local Alert provides three ways to notify people about critical changes and sensor readings from your Scigiene IoT network. The Local Alert flashes a red LED, sounds an audible alarm, and displays the important message upon receiving a notification. The Local Alert can also display sensor readings from any sensor on the same account.
Features:
Specifications:
Power |
||
Standard
Operating Range |
5 - 8
VDC (can be powered by line power or batteries.) |
|
Power
Options |
- 5.5
VDC @ 900 mA power supply (included) - 4 x AA
sized 1.5 V alkaline batteries (included), Only use alkaline batteries. |
|
Current Consumption |
10 uA
(sleep mode) 20 mA
(radio RX mode) 37 mA
(radio TX mode) |
20 mA
(buzzer) 520 uA
(LCD) 30 mA
(LCD backlight) |
Operations |
||
Radio
Frequencies |
Available:
940, 900, 868, and 433 MHz |
|
Antenna |
Connector:
RP SMA Female | Gain: 3.0 dBi |
|
Wireless
Range |
1200 ft.
non-line-of-sight |
|
Wireless
Communication |
Messages
are sent from Scigiene Premier software through a gateway (no direct sensor
to device communication is supported)1 |
|
Message
Storage / Memory |
10
messages (notifications or sensor readings) |
|
Mechanical |
||
Display |
LCD (8
lines of text) | 128 x 32 pixels | 71.55 mm (diagonal) Transflective (visible
in sunlight without back light) |
|
LED |
One
Ultra Bright Red LED (1630 mcd, 110° x 45° Viewing Angle) |
|
Buzzer |
85 dB @
30 cm, 2.5 KHz +/- 500 Hz |
|
Enclosure |
ABS
plastic |
|
Dimensions |
4.0 x
4.0 x 1.6 in. (101.6 x 101.6 x 40.64 mm) Excluding antenna |
|
Weight |
11.2
ounces (with batteries installed) |
|
Environmental |
||
Operating
Temperature |
-18° to
+55° C (0° to +130° F)2 |
|
Storage
Temperature |
-20° to
+70° C (-4° to +158° F) |
|
Certifications |
900 MHz
product; FCC ID: ZTL-G2SC1 and IC: 9794A-G2SC1. 868 and 433 MHz product
tested and found to comply with: EN 300 220-1/2 V3.1.1 (2017-02), EN 301
489-3 V2.1.1 (2017-03), and EN 62368-1 |