The Scigiene Industrial Gen 2 Vehicle Detection Counter can be deployed to detect the presence of a vehicle or count oncoming traffic utilizing a 9 ft. pneumatic tube. Deployment is easy with the included hose anchor and mounting spikes. Simply turn the unit on with the included magnet, roll the hose out where you wish to record traffic data and pound the spikes into the asphalt. In software, select “Counting” or “Detecting” and begin recording data.

The Industrial Gen 2 Vehicle Detection Counter uses a pressure activated switch to detect or count vehicles that drive over the 9ft. long rubber tube. This device ignores normal human or animal traffic across the tube to prevent miscounts (Stomping on the tube can produce a count/detect). This sensor is ideal for use in parking garages and monitoring traffic conditions for automotive services. The sensor sensitivity is factory calibrated for accuracy, but if it needs adjustment the sensor can be calibrated using the built-in adjustment screw and hex key (5 mm) (see the user guide for adjustment procedure).

Features: 

• Detects and counts presence of vehicles as they pass over the tube
• Signal hose anchor and mounting spikes included with purchase
• Power On/Off using included magnet
• Factory calibrated sensitivity that is adjustable
• Wireless range of 1,200+ feet through 12+ walls *
• Frequency-Hopping Spread Spectrum (FHSS)
• Best in class interference immunity
• Best in class power management for longer battery life **
• Datalogs 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle): 10-minute heartbeats = ~ 22 days, 2-hour heartbeats = ~ 266 days
• Over-the-air updates (future proof)

Specifications: