The RHT-DM-485-LCD transmitters include high precision and stability sensors for measuring relative humidity and temperature. They are microprocessor-based devices and, therefore, allow being entirely configured through an RS485 interface using the Modbus RTU command. The DigiConfig software allows the configuration of all transmitter features as well as its diagnostic procedure. The RHT-DM-485-LCD model is equipped with an elongated sensor rod for installation in ducts or through walls. The transmitter can be configured for displaying the values of measured temperature and Relative Humidity, or the values of measured Temperature and Dew Point, or the values of measured Relative Humidity and Dew Point, or the value of measured Temperature only. The communication parameters can be easily field-configured. The values for communication address, baud rate and parity can be changed using the frontal button without the need for using the configuration software.

Features & Specifications:

• 150mm Duct Mount
  
• Temperature: -40.0°C to +100.0°C (-40.0°F to 212.0°F)
• Relative Humidity (RH): 0.0 to 100.0 % RH
• Dew Point: -40.0°C and 100.0°C (-40.0°F to 212.0°F)
• Resolution Temperature: 0.1°C, 14 bits (16383 levels)
• Resolution Relative Humidity: 0.1 %, 12 bits (4095 levels)
• Response Time Temperature: up to 30 s in slow air movement
• Response Time Humidity: up to 8 s in smooth air movement (20 to 80%RH)
• Measurement accuracy: refer to figure on left
• Interval between sampling: 3 seconds
• Power supply: 12 Vdc to 30 Vdc
• Polycarbonate enclosure
• Protection class: Electronic enclosureIP65, Sensor capsule: IP40
• Transmitter operation temperature: from 0°C to 70°C
• Connection cable is included
• DigiConfig Configurator Software provided free of charge