The CAL140-F multifunction calibrator from Scigiene is a high accuracy homogeneous and stable temperature source allowing for several temperature sensors to be calibrated by comparison against a standard sensor. This CAL140 provides an isothermal source with which thermometers and temperature probes can be checked comparing them to the temperature indicated on the temperature controller or with an external thermometer as a separate standalone indicator.
The CAL140-F offers outstanding performance in an easy-to-use portable unit. It can be used as a Dry Block, a Stirred Liquid Bath and Blackbody Source for Infrared Thermometers. The stirred liquid bath function is well suited for calibration of small sensors (less than 157mm).
The CAL140-F calibrator has a sophisticated temperature controller with high accuracy and dual display for Set Temperature and Dry Block Temperature.
Specifications:
| Temperature Range: | 50°C below ambient to +140°C |
| Absolute
Stability: | 0.01ºC
(liquid container), 0.02ºC (dry block) |
| Uniformity
of Temperature: | 0.02ºC
(liquid container), 0.05ºC (dry block) |
| Controller
Resolution: | 0.01ºC |
| Calibration
Volume: | 35mm
diameter by 160mm deep |
| Insert
Holes: | 6 pockets (2 x 4.5mm, 2 x 6.4mm, 1 x 8mm, 1 x 9.5mm, all 157mm deep) |
| Power: | 200 to 240 V (50 / 60 Hz). 200 Watts |
Required Accessories:
| Part # | Description |
| CAL141 | Black Body Insert for CAL140 |
| CAL144 | Stirred Liquid Container for CAL140 |
Optional Accessories:
| Part # | Description |
| CAL142 | Undrilled insert for CAL140 |
| CAL143 | Standard Insert for CAL140 |
| CAL145 | Silicon Oil (0,5 liter) |
| CAL-case | Vinyl carrying case for CAL |
Standard Probes with Calibration Certificate:
| Part # | Description |
| CALR300 | TC R Standard 300mm x 6mm (300°C to 1100°C) |
| CAL250 | RTD Standard 250mm x 6mm (-60°C to 150°C) |
| CAL320 | RTD Standard 320mm x 6mm (0°C to 420°C) |
