The GEN 2 XL® IoT Gateway features a powerful wireless transceiver with up to 1 Watt transmission strength, an amplified receiver, and 4G LTE CAT-M1/NB2 cellular technology to backhaul GEN 2 Wireless Sensor data. The GEN 2 XL IoT Gateway can send and receive data communications with GEN 2 Sensors at 2,000+ feet through 18+ walls in professional building environments. You only need a power source and Scigiene’s Premiere Cloud Based Software to monitor virtually any environment and equipment using Scigiene’s industry-leading wireless IoT devices. The GEN 2 XL® IoT Gateway communicates with GEN 2 Sensors to deliver data and send alerts about various machine, equipment, or area conditions. The GEN 2 XL® IoT Gateway is available in two versions: Professional and Industrial. It's equipped with a 60-hour backup battery and will continue to communicate via its advanced cellular engine transmission in the event of a power outage. Additionally, the GEN 2 XL® IoT Gateway comes with an RJ-45 Ethernet jack (professional version only) for local device configuration. However, it's ideal for applications without a wired Internet connection or with infrastructure dedicated to other resources. The GEN 2 XL® IoT Gateway also includes a GNSS location chipset supporting GPS, GLONASS, BeiDou, Galileo, and QZSS satellites. With the proper gateway subscription enabled, the IoT gateway's location data can be collected, viewed, and distributed and additional software via an application programming interface (API).
Applications:
Features:
Specifications:
Cellular |
|
Cellular Technology |
LTE CAT-M1 /
NB2 module for global use in bands 1,2,3,4,5,8,12,13,18,19,20,25,26,27,28,66,71,85 |
SIM Card Compatibility |
Mini-SIM
(3FF) 15 mm x 12 mm x 0.76 mm |
Cellular Antenna Type |
Connector:
SMA / Gain: 5.0 dBi |
GNSS Antenna Type |
Internal
Mount Active (28db) Ceramic Patch |
GNSS Satellites Supported |
GPS, GLONASS,
BeiDou, Galileo, and QZSS |
Ethernet |
|
Hardware |
IEEE 802.3
10/100BASE-TX compatible controller |
Operation |
Full- and
Half-Duplex |
Cross-over Correction |
Automatic MDI
/ MDI-X |
Protocols Supported |
DHCP, DNS,
UDP, TCP, SNTP, MSVR Proprietary |
Enclosure |
|
Material |
ABS |
Environmental |
|
Operating Temperature |
+5 to +45°C
(41 to 113°F) |
Storage Temperature |
-20 to +60°C
(-4 to 140°F) |
Gen 2 Wireless |
|
Transmit Power (EIRP) |
50 mW (900
MHz), 25 mW (868 MHz), 10 mW (433 MHz) |
Antenna Type |
Connector:
RP-SMA / Gain: 3.0 dBi (900/868) 2.5dBi (433) |
Wireless Range |
1,200+ ft.
non-line-of-sight |
Security |
Encrypt-RF ®
(256-bit Diffie-Hellman key exchange and AES-128 CBC) |
Device Memory |
Up to 32,000
sensor messages (Sensor
messages will be stored in the event of an Internet outage and transferred
when the connection is restored.) |
Certifications |
Safety: IEC
62368-1; EMC: IEC 55024, IEC 55032, IEC 301489-1, -3, -A, -52, FCC 47 CFR
Part 15, subpart B and ICES - 001 Issue 6; RF: 900 MHz product includes model
FCC ID: ZTL-G2SC1 / IC: 9794A-G2SC1 and FCCID: XMR202007BG95M6 /
IC:10224A-2020BG95M6; 868 MHz product includes Module G2SC1 (IEC 300 220-1,
-2); 433 MHz product includes Module G2SC2 (IEC 300 220-1,-2) |