T2 Rapid Test Kit


  • Part #:BTT19019
  • Availability: In Stock

Price: Please call us or add this item to your quote to get pricing.

* Some products require configurations and options that can affect pricing.



Description

T2 Rapid Test Kit is a rapid, one step test for the qualitative (or quantitative) detection of T2 in animal feed and grains (wheat, wheat bran, corns, coconut, millet, flour).


Advantages:

1. 3-5 min reading results

2. Detection limits respond to EU and US FDA norms

3. Single test for every target sample

4. Neither professionals nor equipment required

5. Eyes interpretation or quantitative measurement,suitable for lab and field use

6. Room temperature storage

7. Non-toxic and harmless


Intended Use:

T2 Rapid Test is used to detect T2 in feed, grain and its byproducts. The total assay time takes 8 min.


Test Procedure:

1. Remove T2 Rapid Test from sealed pouch.

2. Suck at least 3 drops of prepared sample, hold the dropper vertically and transfer 3 full drops(around 100μL) of solution to the specimen well (S) of the test device (See the illustration above), and then start the timer.

3. Wait for red bands to appear. The result should be read in approximately 3-5 minutes. Do not interpret results after 5 minutes.


Storage and Stability:

Store at room temperature. The shelf life is 12 months.


Contents:

12 vials (each containing 8 test strips and 8 micro wells) Total 96 tests.


Required accessories:

Micropipettor

Micropipettor tips

Scale 0.1g Solvent

(Ethanol/Methanol*)


Optional accessories:

Vortexer

Microcentrifuge


The use of these will allow you to speed up test time and/or increase accuracy. 


*contact us relative to product being tested to confirms correct solvent.


CTRL line is a quality indicator and will always appear regardless of the  T, B, C & S

Lines results. If CTRL line does not appear, please repeat the assay with a new strip.

 

Performance Information

Precautions and Warnings

1. Do not mix sample tubes and devices from different lot numbers

2. Do not use kits past their expiration dates.

3. Do not touch the field of control/test line, before or while testing.

4. Keep the kits in sealed when not in use.

5. The kit is single-use, do not reuse.

Shelf Life: 12 months

 

Instructions for Use

Prepare the milk sample, and the sample should be at room

temperature, there is no need to heat or refrigerate.

1. Take out the strip,

2. Drop 200ul into the microwell, repeatedly pipetting up

and down 10 times, mix well with the reagent in the wells

completely.

3. Then wait for 3 minutes

4. Insert the test strip into the microwell until the botton of the strip touch the bottom of the microwell.

5. After 7 minutes, read the results.

If you need to record the results then you must take the test strip, dry the

strip and store with your records.