Chloramphenicol Antibiotics Residues Test Kit


  • Part #:BB-A10003
  • Availability: Inquire

Price: $180.00
Price: $243.00


Description

The Chloramphenicol Antibiotics Residues Test Kit is a single test kit, That’s rapid to detect an antibiotic residue in milk and dairy products by using colloidal gold immunochromatography technology as little as 7-10 minutes for results.

Application:
For raw milk, whole milk powder, Pasteurized milk.

Specifications
1. Specificity: Not cross-react with macrolides, trimethoprim, sulfonamides drugs, etc.
2. Limit of Detection: Refer to instruction.

Storage & Shelf-Life:
At 2~8
out of sunlight, 12 months

Components (96T / box)
Instruction      1
Tube             12

Equipment’s (Option):

Timer
Incubator
Mini Pipette(200μL)
Tips for mini pipette
Reader

Interpretation
Visual inspection
1. If C line visible, interpret according to the instruction. T line compare with C line to interpret positive or negative.

2. If C & T are invisible, it’s invalid detection, repeat testing again.

Reader Interpretation
Refer to the instruction

Contents:

12 vials (each containing 8 test strips and 8 micro wells) Total 96 tests.

Required accessories:

Micropipettor

Micropipette tips (volume ?)

Scale 0.1g

Solvent (Ethanol /Methanol*)

 

Optional accessories:

Vortexer

Microcentrifuge

The use of these will allow you to speed up test time and/or increase accuracy. *contact us relative to product being tested to confirms correct solvent.

 

CTRL line is a quality indicator and will always appear regardless of the  T, B, C & S

Lines results. If CTRL line does not appear, please repeat the assay with a new strip.

 

Performance Information

Precautions and Warnings:

1. Do not mix sample tubes and devices from different lot numbers

2. Do not use kits past their expiration dates.

3. Do not touch the field of control/test line, before or while testing.

4. Keep the kits in sealed when not in use.

5. The kit is single-use, do not reuse.

Shelf Life: 12 months

 

Instructions for Use:

Prepare the milk sample, and the sample should be at room temperature, there is no need to heat or refrigerate.

  1. Take out the strip,
  2. Drop 200ul into the microwell, repeatedly pipetting up and down 10 times, mix well with the reagent in the wells completely.
  3. Then wait for 3 minutes
  4. Insert the test strip into the microwell until the bottom of the strip touch the bottom of the microwell.
  5. After 7 minutes, read the results. If you need to record the results then you must take the test strip, dry the strip and store with your records.